BMW Rim Restoration in Dubai
- Kerb Damage Repair, Diamond Cutting, Powder Coating & Straightening

Kerbed, scratched or bent BMW alloys? We repair and refinish them to look factory new, including diamond-cut and M wheels, and check them for balance and run-out.

BMW alloy wheels, from standard double-spoke designs to large M and M Performance wheels, are easy to scuff on Dubai’s high kerbs and tight car parks. Low-profile and run-flat tyres give the rim little protection. At Orange Auto in Al Quoz and Nad Al Hamar we repair kerb rash, scratches and corrosion, straighten bent rims, and refinish wheels in the original BMW colour, including two-tone diamond-cut finishes, so your wheels look new again without the price of new BMW rims.

Get a Free Quote

BMW Wheel Repair Options

What We Fix

  • Kerb rash and scratches on the rim edge.
  • Peeling or corroded lacquer, common on older diamond-cut wheels.
  • Bent rims causing vibration or slow air leaks.
  • Colour changes, such as gloss black, gunmetal or satin finishes.
  • Full refurbishment of a set of four.

How We Restore Your Wheels

  1. Remove the tyre and TPMS sensor and inspect the rim for cracks.
  2. Straighten bent rims on a hydraulic wheel straightener where safe.
  3. Strip, repair and smooth the damaged areas.
  4. Refinish with paint or powder coat, or re-cut diamond-cut faces on a CNC lathe.
  5. Lacquer, refit the tyre and sensor, and balance the wheel.

Safety First

Some damage is cosmetic, but a cracked rim or a badly bent barrel can fail at speed. We inspect every wheel and tell you honestly if a rim should be replaced instead of repaired. After refitting we check the wheel alignment if the damage came from a heavy impact.

Two BMW Workshops in Dubai

Bring your BMW to our Al Quoz workshop or our BMW service centre in Nad Al Hamar. Need new tyres while the wheels are off? See BMW tyre replacement.

BMW Rim Restoration: Frequently Asked Questions

How long does BMW rim repair take?
A single scuffed wheel is often done the same day. A full set or diamond-cut refinishing usually takes one to two days.

Can diamond-cut BMW wheels be repaired?
Yes. We re-cut the face on a CNC lathe and re-lacquer it to match the original look.

Is it safe to repair a bent wheel?
Mild bends can be straightened safely. Cracked or badly bent wheels should be replaced, and we will tell you which.

Send us photos of your BMW wheels on WhatsApp for a quick quote, or visit Orange Auto in Al Quoz or Nad Al Hamar.

Orange Auto - Your Trusted Experts for BMW Service & Repair in the UAE.